Coils super kit black 3 ohm | ACCEL
Specifications
| Manufacturer | ACCEL |
|---|---|
| Product code | 140403K |
| Color/finish | Black |
| Model | Super Coil |
| Ignition type | Electronic (Capacitor Discharge) |
| Style | External |
| Type | Ignition |
| Units | Kit |
| Input voltage | 12 V |
| Ignition fire method | Dual |
| Electrical resistance | 3.0 Ohms |
Product description
Universal Super Coil Kit
High-output coils for use in 2 cylinder motorcyclesACCEL engineers designed these coils' special low-resistance primary winding to match the operating characteristics of factory and aftermarket CDI systemsMaximum performance with fast rise timesExtra-heavy-duty 8.8 mm silicone wires includedMade in the U.S.A.Using the wrong coil may damage your motorcycle's electronic ignition module. To determine your ignition type, complete the following test: 1. Determine whether the type of coil you are replacing is a high tower coil. (These coils will NOT replace single tower coils.) 2. Using a volt meter or 12V test light, hook the positive lead to the positive post and the negative lead to the ground on one of the stock coils. 3. Turn the ignition on, but DO NOT engage the starter button.4. If there are 12V at the coil, the motorcycle has an inductive type ignition. If there is no voltage at the coil, then the motorcycle has a CDI ignition because the power goes to the control box first.